5 Best Variable Speed Pool Pump Reviews

Variable speed pumps have been in the market for some time now and they feature technology that lets the speed get adjusted to the desired flow rate. Due to the ability to alter the speed of these pumps, they provide a great amount of flexibility.

Since this new pumps make use of PMM (permanent magnet motor), they operate more quietly and are cooler. Variable speed pool pumps are Eco-friendly as they use less energy when compared to the single speed pumps. This highly benefits planet earth as less electricity is used and produced. This means there is a minimal carbon dioxide emission and homeowners get to save more as they don’t pay too much for electricity.

Furthermore, homeowners are able to cut down their budgets as the maintenance costs are lower and less frequent equipment replacement.

Our Top 5 Picks of Best Variable Speed Pool Pump Goes To…

Pentair 011018 IntelliFlow Variable Speed Pump

Pentair 011018 IntelliFlow Variable Speed PumpAre you looking to reduce your pool energy consumption and keep more money in your wallet? Well, it simple. Get a Pentair 011018 IntelliFlo Variable Speed Pump and your electricity bill will drastically come down. This speed pump comes with 8 different speed settings which will allow you to carry out tasks at the highest speed so as to produce the most appropriate amount of flow depending with your needs. One can easily set speeds from 400 to 3,450RPM.
For instance, you will need just a little energy to filter water than you will to run a pool cleaner. A single speed pool pump cannot deal with the difference, but the Pentair 011018 variable speed pump easily operates at a speed that’s appropriate to the task it’s carrying out.
The Pentair 011018 has 8 different speed settings that can easily be programmed with a built-in timer. The permanent magnet motor that comes with this pump ensures it emits the least noise while offering a longer pump life. It’s 4 times quieter than other pumps. It also enhances the performance of the filter and chlorinator while at the same time reducing the growth of algae.
 (click here for more user reviews…)

Jandy JEP 2.0 ePump, Variable Speed 2-Horsepower Pump

Jandy JEP 2.0 ePump, Variable Speed 2-Horsepower PumpThe Jandy JEP 2.0 ePump works perfectly well with Jandy automation (Aqualink), but they can be efficient on their own. However, you may need the jandy ePump controller if the pump will be operating independently. This increases the total cost of the entire system. Still, you will require the ePump controller especially when you are using external automation.
This variable speed horsepower pump has a high efficient motor making it one of the quietest and most efficient speed pumps in the market. It comes with 8 variable speeds that are designed to surpass the strictest energy efficiency codes. The jandy stealth wet and a basket that come with this pump have a large capacity. The motor life is long lasting.  (click here for more user reviews…)

Hayward SP2302VSP Max-Flo VS Variable-Speed Pool Pump

Hayward SP2302VSP Max-Flo VS Variable-Speed Pool Pump Energy Star CertifiedThe Hayward SP2302VSP Max-Flo VS is a 1.5 pump and the manufacturer’s claim is the ideal size for most standard residential pools. Unluckily, the speed setting on this pump is just higher to get the same flow rate. The Max-Flo VS is a great option for people with smaller pools that have no heaters and minimal features. The only downside with this pump is that it has no external automation controls. So if you have automation or intend to add it later, then this pump is not for you. The schedules and speeds are usually handled mainly through the onboard control as it has digital programming, monitoring and convenience. In comparison to the regular single speed pumps, one can save up to 80% on energy costs. The permanent magnet and a completely enclosed fan cooled motor design provide total energy efficiency and reliability. It will operate quietly while saving energy.  (click here for more user reviews…)

Waterway ECONOFLO VSA Econo Flo Voltariable Speed Pump

Waterway ECONOFLO VSA Econo Flo Voltariable Speed Pump
The Waterway ECONOFLO VSA Econo Flo Voltariable Speed Pump makes use of AO Smith onboard controller and champion motor. And similar to the Max Flow VS, the waterway VS does not allow for external controlling thus limiting the functionality and any savings for pools that have heating systems and features. The pump has a built-in programmable user interface with a timer and a silent fan cooled motor. The control module can be remotely mounted. One of the best features about this pool pump is the ability to control external equipment such as a heat pump with a relay. However, this pool pump isn’t for you if you want to operate a solar pool heater or a heat pump with efficiency. This is an affordable pump with an in- built freeze protection and meets title 20 and 24 regulations. (click here for more user reviews…)

Hayward SP3400VSP EcoStar VS Variable-Speed Pool Pump

Hayward SP3400VSP EcoStar VS Variable-Speed Pool Pump Energy Star CertifiedThe EcoStar is an excellent variable speed pump. It has a 2.5HP motor with an on-board controller. It comes with four speed buttons and eight schedules. The Ecostar easily connects to automation products a bit differently, with an analogue interface. When it’s linked to automation, the pump is able to operate in eight different speeds that are based on the analog input in the pump. In most cases, the on-board controls are usually overridden with the external controller taking over. Even when externally controlled the Ecostar still displays the pump running speed and energy use on the pump display when it’s externally controlled.

There are pros and cons to analog control. You get total flexibility as any automation product in the market can send the pump speed commands. Unfortunately, the number of speeds is limited by the number of available relays provided and available in the automation system. Nevertheless, additional speeds for pool service personally or any other needs can always be added. One great feature about this variable speed pump is the ability to mount the display remotely on the wall or turn it facing any of the four directions of the pump. It’s also fully programmable with a built in 24 hour time cock with over 8 custom speed and timer functions. (click here for more user reviews…)

Final Thoughts

If you can comfortably afford the upfront costs of a variable speed motor, you can be sure it will pay for itself in the shortest time in terms of energy savings. It’s not only a great way of going green, but a responsible choice. Variable speed pumps are mainly designed for in ground pools, but they will work perfectly well on above ground pools. You will not only be saving on energy on purchasing this pump, put also you won’t have to replace your pump every 3 to 5 years.

Powered by WordPress. Designed by Woo Themes